UNIVAL™ DMDA-6230 NT 7 High Density Polyethylene Resin

O que é UNIVAL™ DMDA-6230 NT 7 High Density Polyethylene Resin?

This product offers outstanding environmental stress crack resistance, high impact strength and good extrusion characteristics.

Intermittent or continuous blow molding equipment to produce containers up to 20 gallons in size
Applications that require the combination of outstanding environmental stress crack resistance and high impact strength
High speed production of blow molded containers used for packaging household industrial chemicals (e.g., detergents, bleach, fabric softeners), toiletries and cosmetics (e.g., shampoos, creams, lotions, etc.), health and medicinal aids
Can be blow molded into other thin walled parts and houseware items, and also can be extruded into profiles or sheets

key.properties.Title
Density	0.949 g/cm3
Melt Index (g/10min @190°C/2.16 kg (ASTM D1238))	0.25

app.properties.Title
Anti-block	No
Slip	No

typical.properties.Title
2% Secant Modulus, MD (ASTM D882) in MPa (psi)	900 (130000)
2% Secant Modulus, TD (ASTM D882) in MPa (psi)	900 (130000)
Bottles and Drums Use	Food, Household Industrial Chemicals (HIC) / Agriculture Bottles, Personal Care, Water / Juice / Dairy
Brittleness Temperature in °C(°F)	< -76.1
Density Range	.940-.950
ESCR-Environmental Stress Crack Resistance (100% IGEPAL)	180 hr
Fabrication Method	Blow Molding
Functionality	Mechanical Performance
Impact Strength in MPa (psi)	210 kJ/m2 (100 ft lb/in2) ASTM D1822
Tensile Elongation at Break, MD	900 %
Tensile Elongation at Break, TD	900 %
Tensile Strength Break, MD (ASTM D638) in MPa (psi)	31 (4500)
Tensile Strength Break, TD (ASTM D638) in MPa (psi)	31 (4500)
Tensile Strength Yield, MD (ASTM D638) in MPa (psi)	23.4 (3400)
Tensile Strength Yield, TD (ASTM D638) in MPa (psi)	23.4 (3400)